Previous Specifications

Table Subsurface
All top panels, cross bracing and end caps are high strength alloy 6063-T6 extruded aluminum smooth finish. Top surfaces are .080" thick with integral stiffener ribs; perimeter edges are heavy gauge and have a high impact cast corner protective insert which will take abuse from frequent set-up/take down. Aluminum feedstock contains recycled aluminum. Southern Aluminum products are recyclable. Painted surfaces are thermal set powder-coated finishes and have the hardest surface and maximum scratch/mar resistant qualities in the industry. Table edges utilize a reinforced inside radia impact resistant design capable of withstanding frequent usage. Fasteners are aluminum rivets and zinc-plated steel. All edges on the table top have a smooth rounded edge, including corners. Table will withstand a drop squarely on its edges/corners from a height of 24" without splitting apart, cracking or creating sharp corners. Southern Aluminum products have a Lifetime Guarantee - for as long as you own them!

Table Surface
Inlay surface is high pressure laminate from WilsonArt™ with premium scratch resistant finish, permanently bonded with contact adhesive. Manufacturer provides 5-year warranty on laminate.

Colors
View laminate options and inlay colors at www.wilsonart.com. View perimeter and leg colors at www.alulite.com or call the factory for samples.

Load Capacity
All tabletops will support up to 4,000 lbs. of distributed weight. All aluminum leg styles are tested to exceed 2,000 lbs. of direct weight on each leg.

Legs
All legs, except I Leg style, are welded together for strength, then attached to the table with zinc-plated bolts and nuts. All leg styles are a standard 29" height. Legs will not conduct electrical current. Powder-coat paint is applied for finishing on all leg styles except Chrome I Leg style. Tube openings are covered by caps.

H, Roman, & Seminar Leg Styles
The H, Roman, and Seminar folding legs are 1 1/2" extruded square aluminum with .065" wall thickness high strength alloy 6063-T6 aluminum smooth finish.

Individual Folding Leg Style
The individual folding legs are 1 1/2" square aluminum with .065" wall thickness high strength alloy 6063-T6 extruded aluminum smooth finish. These legs are standard on the square table and on round 48" diameter table.

ILeg Style
This style leg is constructed of 2" outside diameter .125" wall thickness high strength alloy 6063-T6 extruded aluminum smooth finish tubing encasing a full length 3/8" high tensile steel thru bolt with internal spacers, reinforcing plates top and bottom, and washers for even weight bearing distribution throughout the leg. Available in powder-coat paint finish or anodized in bright "chrome like" finish.

Pedestal Base
Spider leg top and bottom are cast iron and connected via a steel thru-bolt with nut encased in a 4" diameter steel tube. Bottom comes with adjustable nylon glides. Pedestal is available in 30" or 42" height.

Leg Styles
HStyle	Roman I	Roman II	Seminar	Individual Folding

Sizes
Rectangle 18" x 60" x 29.5" 18" x 72" x 29.5" 18" x 96" x 29.5" 24" x 60" x 29.5" 24" x 72" x 29.5" 24" x 96" x 29.5" 30" x 60" x 29.5" 30" x 72" x 29.5" 30" x 96" x 29.5" 36" x 60" x 29.5" 36" x 72" x 29.5" 36" x 96" x 29.5"	Round 48" dia x 29.5" 60" dia x 29.5" 90" dia x 29.5" Card 36" x 36"x 29.5"	Half Round 60" dia x 29.5" 72" dia x 29.5" Crescent 30" x 60" dia x 29.5"
	Round Pedestal 30"(d) x 30"(h) 30"(d) x 42"(h) 36"(d) x 30"(h) 36"(d) x 42"(h)	Square Pedestal 30"(w) x 30"(l) x 30"(h) 30"(w) x 30"(l) x 42"(h) 36"(w) x 36"(l) x 30"(h) 36"(w) x 36"(l) x 42"(h)

Accessories

The following options are available for iDesign tables:

Sound Damp
Skirting
Skirting Clips
Table Trucks
Table Tiers
Grommet Hole
Seminar Leg (only on 24" models)
Modesty Panel (only on 24" models)

Actual colors may vary from displayed or printed images. Please obtain a sample to ensure a proper color match.

Perimeter/Leg colors
Silver Anodized	Desert Tan	Sage Green	Mahogany	Salt/Pepper	Verde Green
Matte Black	Stone	Dusty Rose	Pepper/Salt	Walnut	Graphite Blue

REFERENCE JOB	QTY.	REMARKS	Projects
			Location
			Architect
			Engineer
			Contractor
			Submitted by	Date