Aluminum
All aluminum components are smooth finish high strength alloy 6063-T6 extrusions unless otherwise noted. Aluminum feedstock contains recycled aluminum. Alulite® products are recyclable.

Table Standard Finish Options

Silver Anodized	Desert Tan	Verde Green	Matte Black	Stone	Graphite Blue
Matte Mahogany	Salt/Pepper	Sage Green	Matte Walnut	Pepper/Salt	Dusty Rose

Actual colors may vary from displayed or printed images. Please obtain a sample to ensure a proper color match.

All top panels, cross bracing and end caps are high strength alloy 6063-T6 extruded aluminum smooth finish. Top surfaces are .080” thick with integral stiffener ribs; perimeter edges are heavy gauge and have a high impact cast corner protective insert which will take abuse from frequent set-up/take down. Aluminum feedstock contains recycled aluminum. Southern Aluminum products are recyclable. Painted surfaces are thermal set powder-coated finishes and have the hardest surface and maximum scratch/mar resistant qualities in the industry. Table edges utilize a reinforced inside radia impact resistant design capable of withstanding frequent usage. Fasteners are aluminum rivets and zinc-plated steel. All edges on the table top have a smooth rounded edge, including corners. Table will withstand a drop squarely on its edges/corners from a height of 24” without splitting apart, cracking or creating sharp corners. Southern Aluminum products come with a Lifetime Guarantee for as long as you own them!

Colors
View laminate options and inlay colors at www.wilsonart.com.

Table Surface
Inlay surface is high pressure laminate from WilsonArt™ with premium scratch resistant finish, permanently bonded with contact adhesive. Manufacturer provides 5-year laminate warranty.

Load Capacity
All table tops will support up to 3,000 lbs. of distributed weight. All aluminum leg styles are tested to exceed 2,000 lbs. of direct weight on each leg. Extended table leaf supports 1,000 lbs.

Roman III Leg Styles The Roman III folding legs are 1 1/2” square aluminum with .065” wall thickness high strength alloy 6063-T6 extruded aluminum smooth finish. Legs are welded together for strength, then attached to the table with zinc-plated bolts and nuts. All leg styles are a standard 29” height. Legs will not conduct electrical current. Powder-coat paint is applied for finishing on all leg styles. Tube openings are covered by caps.

Sizes

Folding Legs

Roman III

Accessories
The following options are available for Alulite tables:

Skirting Clips
Table Trucks
Grommet Hole